Türkçe
İngilizce
Arapça
RusçaProducts
Machine Plaster
It is a machine plaster with increased heat and sound insulation properties that can be applied on concrete, exposed concrete, aerated concrete, pumice and brick surfaces.
| Product Code : | |
| Product Category : | Powder Plaster Group |
It is a machine plaster with increased heat and sound insulation properties that can be applied on concrete, exposed concrete, aerated concrete, pumice and brick surfaces.
Application Surface Features:
Substances that prevent adhesion (dust, oil, etc.) on the application surface must be cleaned. Brick, concrete and aerated concrete surfaces should be wetted with water before application. Surface smoothness must be ensured on the application surface.
Instructions for Use:
The appropriate amount of water/plaster is adjusted on the plastering machine. The plaster thickness is applied at a thickness of 1.5 cm each time. According to this thickness, anos are placed at intervals that will not exceed the length of the gauge used. The plaster mortar prepared with a plastering machine is sprayed between the tiles. The filled surface is smoothed using an aluminum gauge, taking the anoes as reference. Excess mortar is removed by scraping it from the surface. After this process, the mortar on the surface is left as it is and the filling of other tiles is started. Before starting to pre-set the plaster mortar, the surface should be polished with a trowel.